Search results for 'Cable USB A to B//'
-
$36.25 As low as: $34.07
The
is a port-powered converter with optoelectronic isolation. It complies with RS-232C, RS422, and RS-485 standards; it converts single side RS-232 signal to a balanced differential RS-422 or RS-485 signal.- Standards: RS-232C/ RS-485/ RS-422 EIA/TIA
- RS-422/485 6 bits terminal block output
- Port protection: RS-232 ±15KV ESD protection;
- RS-422/485 600W surge protection
- Isolation: 2,500Vrms isolated voltage, continuous 500VDC
-
$32.99 As low as: $31.01
Great for RS232 communication between a PC and a device that needs an RS422 or RS485 protocol. The GM-1042E-B converter is compatible with RS-232C, RS-485/422 standards. It converts RS-232 signals into balanced differential RS-485 or RS-422 signals.
- Standards: RS-232C, RS-485/422 EIA/TIA
- Baud rate: 300bps-115.2kbps
- Transmission distance: 1,200m (RS-485/422); 5m (RS-232)
-
$13.19 As low as: $10.49
The converter is compatible with RS-232C and RS-485 standards. It converts RS-232 signals into balanced differential RS-485 signals.
- Standards: RS-232C,RS-485 EIA/TIA
- Built in terminal block
- Baud rate: 300BPS-115.2KBPS
- Transmission distance: 1,200m(RS-485), 5m(RS-232)
-
$17.59 As low as: $16.53
The GM-1004E-B converts RS-232 signals into balanced differential RS-485 signals. The converter is designed to protect the RS-485 port; with integrated TVS’s (TRANSIENT VOLTAGE SUPPRESSOR).
- Transmission media: twisted-pair or shielded cable
- Baudrate: 300ps-115.2kbps
-
$20.89 As low as: $19.64
The GM-1004E-B converts RS-232 signals into balanced differential RS-485 signals. The converter is designed to protect the RS-485 port; with its advanced TVS’s (TRANSIENT VOLTAGE SUPPRESSOR).
- Transmission media: twisted-pair or shielded cable
- Isolation: Isolated voltage 2,500Vrms 500VDC non-stop
-
$159.99
The MSD-SRP2XM-TBPRO is a multi-protocol RS-232 and RS-422 / 485 serial device server that is designed to connect RS-232, RS-422 and RS-485 serial devices including POS, barcode readers, sensors, meters, weighing systems, CNC controllers and PLC to an IP-based Ethernet Network. The MSD-SRP2XM-TBPRO provides 2 ports, port 1 supports RS-232 mode only and port 2 supports RS-422 / 485 modes.
Learn More -
$99.99 As low as: $93.99
The MSD-SRP1XM-PRO is a multi-protocol RS-232 / 422 / 485 3-in-1 serial device server that is designed to connect RS-232, RS-422 and RS-485 serial devices including POS, barcode readers, sensors, meters, weighing systems, CNC controllers and PLC to an IP-based Ethernet Network.
Learn More -
$139.99 As low as: $131.59
The MSD-SRP2XM-PRO is a multi-protocol RS-232 / 422 / 485 3-in-1 serial device server that is designed to connect RS-232, RS-422 and RS-485 serial devices including POS, barcode readers, sensors, meters, weighing systems, CNC controllers and PLC to an IP-based Ethernet Network.
Learn More -
$229.99 As low as: $216.19
The MSD-SRP4XM-PRO is a multi-protocol RS-232 / 422 / 485 3-in-1 serial device server that is designed to connect RS-232, RS-422 and RS-485 serial devices including POS, barcode readers, sensors, meters, weighing systems, CNC controllers and PLC to an IP-based Ethernet Network.
Learn More -
$34.99 As low as: $32.89
This TB-DB9TO9CAN DB9 female to screw-less 9-pin terminal block adapter provides a convenient and quick solution to convert a DB9 to a 9-pin terminal block for easy and fast writing in CAN Bus. This CAN terminator consists of a 120 Ohm termination resistor.
- Converts the DB9 Male input connected to the Female DB-9 serial port to a terminal block connection for fast easy writing in CAN Bus.
- Supports screw-less wiring with complete RS-422 or RS-485 data signals.
- Extremely compact terminal block connector reduces bulky adapters when needed.
- Easy identification on the adapter for 9 signal pins.
- 120Ohm termination resistor.