Search results for 'usb cable'

This TB-DB9TO9CAN DB9 female to screw-less 9-pin terminal block adapter provides a convenient and quick solution to convert a DB9 to a 9-pin terminal block for easy and fast writing in CAN Bus. This CAN terminator consists of a 120 Ohm termination resistor.

• Converts the DB9 Male input connected to the Female DB-9 serial port to a terminal block connection for fast easy writing in CAN Bus.
• Supports screw-less wiring with complete RS-422 or RS-485 data signals.
• Extremely compact terminal block connector reduces bulky adapters when needed.
• Easy identification on the adapter for 9 signal pins.
• 120Ohm termination resistor.

The MSD-SRP4XM-PRO is a multi-protocol RS-232 / 422 / 485 3-in-1 serial device server that is designed to connect RS-232, RS-422 and RS-485 serial devices including POS, barcode readers, sensors, meters, weighing systems, CNC controllers and PLC to an IP-based Ethernet Network.

The MSD-SRP2XM-PRO is a multi-protocol RS-232 / 422 / 485 3-in-1 serial device server that is designed to connect RS-232, RS-422 and RS-485 serial devices including POS, barcode readers, sensors, meters, weighing systems, CNC controllers and PLC to an IP-based Ethernet Network.

The MSD-SRP1XM-PRO is a multi-protocol RS-232 / 422 / 485 3-in-1 serial device server that is designed to connect RS-232, RS-422 and RS-485 serial devices including POS, barcode readers, sensors, meters, weighing systems, CNC controllers and PLC to an IP-based Ethernet Network.

The MSD-SRP2XM-TBPRO is a multi-protocol RS-232 and RS-422 / 485 serial device server that is designed to connect RS-232, RS-422 and RS-485 serial devices including POS, barcode readers, sensors, meters, weighing systems, CNC controllers and PLC to an IP-based Ethernet Network. The MSD-SRP2XM-TBPRO provides 2 ports, port 1 supports RS-232 mode only and port 2 supports RS-422 / 485 modes.

The GM-1005A-B converts RS-232 signals into balanced differential RS-422 signals. The transmission distance of RS-232 communication can be extended to 1.2km.

• Transmission media: twisted-pair or shielded cable
• Baud rate: 300bps-115.2kbps

Great for RS232 communication between a PC and a device that needs an RS422 or RS485 protocol. The GM-1042E-B converter is compatible with RS-232C, RS-485/422 standards. It converts RS-232 signals into balanced differential RS-485 or RS-422 signals.

• Standards: RS-232C, RS-485/422 EIA/TIA
• Baud rate: 300bps-115.2kbps
• Transmission distance: 1,200m (RS-485/422); 5m (RS-232)

The GM-10127-B is a port-powered converter with optoelectronic isolation. It complies with RS-232C, RS422, and RS-485 standards; it converts single side RS-232 signal to a balanced differential RS-422 or RS-485 signal.

• Standards: RS-232C/ RS-485/ RS-422 EIA/TIA
• RS-422/485 6 bits terminal block output
• Port protection: RS-232 ±15KV ESD protection;
•  RS-422/485 600W surge protection
• Isolation: 2,500Vrms isolated voltage, continuous 500VDC

• Adds one RS-232, or RS-422, or RS-485 serial port via USB connection.
• Remote Serial Port Sharing: allows remote access to USB serial port regardless of its
  physical location.
• ESD surge protection of 15 KV.
• Monitor LEDs of Power, TxD, RxD indicating power & port status.