- Description
-
Details
The 5 foot Serial UART USB to 3.3v TTL PIN Header Cable (TTL level) adapter allows you to connect your computer through the USB port and use it as a regular serial communication device with support for 7 or 8 data bits. All USB protocol is handled within this adapter using an FTDI Chip set. There is no other device or programming required.
The USB to 3.3v TTL PIN Header Adapter Cable is perfect for embedded systems that require a serial connection to a computer and provides a USB to TTL Serial interface to 6-pin header. The board attaches directly to the USB bus via a standard type A receptacle connector. It shows up on any Windows computer as a standard serial COM port. Any applications that talk to this COM port is automatically converted to USB and back to UART on your target board.
Additional features:
- The Cable provides a USB to TTL Serial interface to 6-pin header.
- Single board USB to asynchronous serial data transfer interface
- Entire USB protocol handled by the electronics in the cable USB
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
- Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking.
- Data transfer rates from 300 baud to 3 Mbaud at TTL levels.
- +3.3V output allows external logic to be powered from the USB port
- VCC Output rating current Max. 50mA
- Transmit and receive LEDs
- UHCI / OHCI / EHCI host controller compatible
- Low USB bandwidth consumption.
6-Pin Header Assignment:
- Pin 1 GND
- Pin 2 CTS
- Pin 3 VCC
- Pin 4 TXD
- Pin 5 RXD
- Pin 6 RTS
OS Support:
- Win XP, 2000, 2003, CE, Vista, 7, 8
- Linux
- Mac OS 10.X
Package Contents:
- USB to 3.3v TTL PIN Header Cable
- Latest FTDI Driver (available for download)
- GM-TTL3VT Product Manual (available for download)
- Additional Information
-
Additional Information
SKU SS-TTL3VT UPC 729440625832 Color Black OS Compatibility Linux, OSX 10, Windows 11, Windows 10, Windows 8 Country of Origin China PCN Notice URL N/A Length (ft) 6 Downstream Port Count No Downstream Port Type No Serial Modes No Chip Model No - Reviews
-
Customer Reviews 2 item(s)
- It plugs and plays.
-
I've made some of my home-built Arduinos to run on 3.3 volts, and until now, I to put a 3.3 volt regulator on those boards. With this cable, I get a regulated 3.3 volt supply (plus the USB <-> TTL serial conversion). No additional drivers were needed; the Mac recognized it immediately.
Quality Value Price - Worked perfectly
-
Used this to make a custom cable for a device that needed a TTL level serial connection, worked perfectly and love the molded connector that lets you see the TX/RX LEDs on the board... do wish it came with some documentation as to what colors are what signal but was able to make an educated guess from the pin numbers listed in the description
Quality Value Price