A Controller Area Network (CAN) is a high-integrity asynchronous serial bus system for networking intelligent devices. It is often used in automotive and industrial systems.The USB-2CAN-SI-M is designed to make a fast, simple way to communicate with CAN bus devices. Connected to a USB port on your computer or USB hub, the USB-2CAN-SI-M instantly adds two industrial CAN bus channel to your host system with easy plug and play (PnP) and hot plug features. The USB-2CAN-SI-M provides a cost-effective solution for customers to enable communication with CAN bus devices. The solution designed using an ARM Cortex-M0 32-bit micro controller and the USB to serial chip makes it very flexible in handling small burst of CAN frames at a high speed. The USB-2CAN-SI-M has 2500V galvanic isolation on its CAN bus. The galvanic isolation protects your computer by preventing spikes and surges from crossing over to your computer.

Features:

• Adds two CAN bus port on your computer by connecting to a port
• 16kV ESD & 2.5kV Optical Isolation Protection
• Powered by USB port, no external power adapter required
• LEDs indicate initialization and CAN bus status
• Installs as a standard Windows COM port
• Supported CAN modes: Standard, Listen, Echo
• Can be controlled over serial port using ASCII commands
• Easy to use API provided along with sample source codes and GUI sample programs
• Easy plug and play installation and CAN bus device connection
• CAN bus speed up to 1Mbps
• 128 bytes transmit and 384 bytes receive FIFO buffer for high speed data throughput
• Supports CAN 2.0A and CAN 2.0B protocols
• Designed by ARM Cortex-M0 32-bit microcontroller and the USB to UART chip
• Drivers provided for Windows and Linux OS
• Supports SocketCAN (slcan driver) since kernel 2.6.38+

OS Support:

• Windows Windows 7, Windows 8, and Windows 10
• Linux and Mac OS 10.X