USB Serial
-
$32.99 As low as: $31.01
Great for RS232 communication between a PC and a device that needs an RS422 or RS485 protocol. The GM-1042E-B converter is compatible with RS-232C, RS-485/422 standards. It converts RS-232 signals into balanced differential RS-485 or RS-422 signals.
- Standards: RS-232C, RS-485/422 EIA/TIA
- Baud rate: 300bps-115.2kbps
- Transmission distance: 1,200m (RS-485/422); 5m (RS-232)
-
$119.99
The NCAN-1 is designed to make a fast, simple way to communicate with CAN bus devices. The NCAN-1 adds one industrial CAN bus channel to your host system with a transparent virtual serial port without limitations on operating systems and distances.
- Adds one virtual CAN port via network connection
- Supports network protocols such as TCP and UDP client/server
- CAN bus speed up to 1Mbits
- Provides DC +5V 100mA power for external devices
-
$159.99
Out of stock
The NCAN-2 is designed to make a fast, simple way to communicate with CAN bus devices. The NCAN-2 adds two industrial CAN bus channel to your host system with a transparent virtual serial port without limitations on operating systems and distances.
- Adds two virtual CAN port via network connection
- Supports network protocols such as TCP and UDP client/server
- CAN bus speed up to 1Mbits
- Provides DC +5V 100mA power for external devices
-
$54.95
RS232 to TTL CMOS Conversion
Conveniently convert to TTL from RS232 with this RS232 to TTL CMOS conversion adapter, it supports standard RS232 signals and does not require any additional power source once connected.
- Provides one RS232 to TTL/CMOS adaption
- Supports 5V and 3.3V Tolerance Signals
- Very compact
- Supports baud rate up to 115.2 Kbps
-
$29.99 As low as: $28.19
This Screw-less terminal block adapter is designed for fast and easy connection from DB9 female to spring clamp terminal block wiring for RS-422 / 485 in one small convenient package featuring ESD protection.
- Converts the DB9 Male input connected to the Female DB-9 serial port to a terminal block connection for fast easy wiring applications.
- Supports screw-less wiring with complete RS-422 or RS-485 data signals.
- Extremely compact terminal block connector reduces bulky adapters when needed.
- Features 30kV ESD Surge Protection to keep your connections safe
- Easy identification on the adapter for 9 signal pins.
-
$34.99 As low as: $32.89
This TB-DB9TO9CAN DB9 female to screw-less 9-pin terminal block adapter provides a convenient and quick solution to convert a DB9 to a 9-pin terminal block for easy and fast writing in CAN Bus. This CAN terminator consists of a 120 Ohm termination resistor.
- Converts the DB9 Male input connected to the Female DB-9 serial port to a terminal block connection for fast easy writing in CAN Bus.
- Supports screw-less wiring with complete RS-422 or RS-485 data signals.
- Extremely compact terminal block connector reduces bulky adapters when needed.
- Easy identification on the adapter for 9 signal pins.
- 120Ohm termination resistor.
-
$25.25 As low as: $23.74
The GM-1005A-B converts RS-232 signals into balanced differential RS-422 signals. The transmission distance of RS-232 communication can be extended to 1.2km.
- Transmission media: twisted-pair or shielded cable
- Baud rate: 300bps-115.2kbps
-
$20.89 As low as: $19.64
The GM-1004E-B converts RS-232 signals into balanced differential RS-485 signals. The converter is designed to protect the RS-485 port; with its advanced TVS’s (TRANSIENT VOLTAGE SUPPRESSOR).
- Transmission media: twisted-pair or shielded cable
- Isolation: Isolated voltage 2,500Vrms 500VDC non-stop
-
$17.59 As low as: $16.53
The GM-1004E-B converts RS-232 signals into balanced differential RS-485 signals. The converter is designed to protect the RS-485 port; with integrated TVS’s (TRANSIENT VOLTAGE SUPPRESSOR).
- Transmission media: twisted-pair or shielded cable
- Baudrate: 300ps-115.2kbps
-
$15.39 As low as: $14.47
Adopts advanced optoelectronic isolation technology, prevents RS-232 serial interface device damage from a bad environment, such as ground loop circuit voltage, surge, lightning, ESD, hot-plug and electromagnetic interference, etc.
- Transmission mode: asynchronous, full-duplex, full transparent
- Isolated voltage: 2,500Vrms impulse or 500VDC